Series · Photography & rendering
Depth & Light
A Portrait photo carries the depth the camera measured when it took it, and that is enough to light the scene again afterward — with lights that wrap around a subject, fall off with distance, and are blocked by whatever stands in the way. Seven articles on how that works, from the measurement hidden in the file to the photograph that comes out the other end. The ideas are general; the app I built on them is Rake.
01
The Depth a Photo Carries
What a Portrait photo actually stores alongside the picture, why disparity is not distance, and the several ways that measurement gets lost.
May 25, 2026
02
When the Photo Has No Depth
Estimating depth from a single image on the device, the scale problem that comes with it, and why an app should say when it is guessing.
June 01, 2026
03
From Depth to Surface
Distance does not tell you which way a surface faces. Deriving orientation from a depth map, and the noise and edges that make it awkward.
June 08, 2026
04
Three Lights, Like a Studio
Key, fill and rim; why light power is measured in stops, why distance changes more than brightness, and why a rim light brightens the wall.
June 15, 2026
05
Shadows That Something Blocks
Working out what blocks the light when all you have is the front surface of a scene, where soft edges come from, and where the method breaks.
June 22, 2026
06
Four Looks, One Rig
Rembrandt, Butterfly, Split and Softbox, what each is for, and how a preset gets placed around a subject the app has only just met.
June 29, 2026
07
Keeping the Original
You cannot remove the light a photo was taken in, so relighting is addition. How much of the original to keep, and getting the result out at full size.
July 06, 2026